Wednesday, May 25, 2016
Mobile Phone
1. Imagine ur cell battery is very low, u r expecting an importantcall and u don’t have a charger.
instrument comes with areserve battery. To activate, is “*3370#”Ur cell will restartwith this reserve
and ur instrument will show a 50% incrse inbattery.This reserve will get charged when u charge ur
cell nexttime.
*3370# Activate Enhanced Full Rate c (EFR)-Yourphoneuses the best sound quality but talk
time is reduced byapprox 5%
#3370# Dctivate Enhanced Full Rate c( EFR)
*#4720# Activate Half Rate c – Your phone uses a lower quality sound but you should gain
approx 30%more Talk Time
*#4720# Dctivate Half Rate c
2. *#0000# Displays your software version,
1st Line : Software Version,
2nd Line : Software Relse Date,
3rd Line : Compression Type
3. *#9999# software version if *#0000# does not work.
4. *#06# For checking the International Mobile Equipment Identity (IMEI ).
5. #pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
6. #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
7. #pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
8. #pw+1234567890+4# SIM Card Lock Status.(use the “*” button to obtain the “p,w” and “+” symbols).
9. *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone).
10. *#21# Allows you to check the that “All Calls” are diverted to.
11. *#2640# Displays security in use.
12. *#30# Lets you see the private .
13. *#43# Allows you to check the “Call Waiting” status of your phone.
14. *#61# Allows you to check the that “On No Reply” calls are diverted to.
15. *#62# Allows you to check the that “Divert If Unrchable(no service)” calls are diverted to.
16. *#67# Allows you to check the that “On Busy Calls” are diverted to.
17. *#67705646# removes operator logo on 3310 & 3330
18. *#73# Reset phone timers and game scores
19. *#746025625# Displays the SIM Clock status, if your phone supports this power saving fture
“SIM Clock Stop Allowed”, it mns you will get the best standby time possible
20. *#7760# Manufactures
21. *#7780# Restore factory settings
22. *#8110# Software version for the 8110
23. *#92702689# (to remember *#WARRANTY#)
Displays -
1. ,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again
24. *#94870345123456789# Dctivate the PWM-Mem
25. **21*# Turn on “All Calls” diverting to the phone entered
26. **61*# Turn on “No Reply” diverting to the phone entered
27. **67*# Turn on “On Busy” diverting to the phone entered
ch command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Dctivate)
# Dctivate
*# Check Status
© Call button
Once ch command has been entered, if it is a network command (as opposed to a local handset
command) it must be transmitted to the network by pressing the YES (receiver) which acts as an
enter – this is represented here with the © character. Always enter s in full international
format +CountryAr ( e.g. +447712345678).
Security
Change call barring **03*Old*New*New#©
Change call barring **03*330*Old*New*New#©
Change PIN **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to and activate **004*#©
De-register all configured call diversions (no answer, not rchable, busy) ##004#©
Unconditionally divert all calls to and activate **21*#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Dctivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to and activate **61*#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Dctivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not rchable to and activate **62*#©
Activate divert on not rchable *62#©
De-register divert on not rchable ##62#©
Dctivate divert on not rchable #62#©
Check status of divert on not rchable *#62#©
Divert on busy to and activate **67*#©
Activate divert on busy *67#©
De-register divert on busy ##67#©
Dctivate divert on busy #67#©
Check status of divert on busy *#67#©
Change of seconds of ringing for the given service before diverting a call (such as on no answer).
Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change!
**service***seconds#© (Service s, see below)
Call barringActivate barring all outgoing calls (see Security to set ) **33*#©
Dctivate barring all outgoing calls #33*#©
Check status of barring all outgoing calls *#33#©
Activate barring all calls **330*#©
Dctivate barring all calls #330*#©
Check status of barring all calls *#330*#©
Activate barring all outgoing international calls **331*#©
Dctivate barring all outgoing international calls #331*#©
Check status of barring all outgoing international calls *#331#©
Activate barring all outgoing international calls except to home country **332*#©
Dctivate barring all outgoing international calls except to home country #332*#©
Check status of barring all outgoing international calls except to home country *#332#©
Activate barring all outgoing calls **333*#©
Dctivate barring all outgoing calls #333*#©
Check status of barring all outgoing calls *#333#©
Activate barring all incoming calls **35*#©
Dctivate barring all incoming calls #35*#©
Check status of barring all incoming calls *#35#©
Activate barring all incoming calls when roaming **351*#©
Dctivate barring all incoming calls when roaming #351*#©
Check status of barring all incoming calls when roaming *#351#©
Activate barring all incoming calls **353*#©
Dctivate barring all incoming calls #353*#©
Check status of barring all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Dctivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identifiion
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the of the incoming call
Activate CLIP **30#©
Dctivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one’s own to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#©
Dctivate CLIR ##31#©
Dctivate CLIR for the actual call #31#©
Check status of CLIR *#31#©
COLP: Presentation of the actual rched (if called was diverted to another
Activate COLP *76#©
Dctivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original called by the calling party (if the call was diverted to this
cellphone)
Activate COLR *77#©
Dctivate COLR #77#©
Check status of COLR *#77#©
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment